Our boundary wall systems incorporate a 78mm thick Speedpanel as the exterior surface fixed to a structural timber or steel* stud wall with insulation located within the framing cavity and an internal plasterboard lining.
In a boundary wall situation, being able to construct a pre-finished, fire rated wall from one direction is often essential, specifically where access is difficult or non-existent from the adjoining property. Speedpanel systems provide a pre-finished aesthetic with various galvanised or colour steel options. This negates the need for additional finishes and painting requirements.
Due to the ease of handling and lightweight composition of Speedpanel and the fact that most systems can be constructed and screwed off from one direction, the associated costs of scaffolding or other elevated work platforms are eliminated. Speedpanel can be assembled directly through the framing when required.
*Timber structure must be in accordance with AS 1720.1 or AS 1684. Steel structure must be in accordance with AS/NZS 4600 or AS 3623.
Featured Project
DREAMCATCHER, MELBOURNE
Speedpanel was used for external boundary walls due to the compact site leaving restricted accessibility and therefore requiring the ability to build from one side. 2-3 builders could easily install Speedpanel due to its lightweight composition, saving time and money.
Architect: Fiona Winzar Architects
Technical data relating to the 51mm Speedpanel, including acoustic systems, wind loading data, design considerations and more.
SPEEDPANEL PARTY WALL SYSTEMS
Up to FRL -/120/120 | 51, 78mm | Party Walls
Performance of 51mm and 78mm Speedpanel party wall systems installed vertically, up to 14.0m in a townhouse application.
Our Project Portfolio is as extensive as our knowledge.
